Submissions

Online Submissions

Already have a Username/Password for Panduan untuk belajar jurnal?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

--> muncul di ABOUT : Subsmission : Author Guidelines

 

diisi dengan petunjuk penulisan dalam jurnal, seperti format, gaya selingkung, gaya sitasi, penulisan data set, penyajian grafik, penyebutan alat, dan sebagainya. selain itu disediakan tautan untuk mengunduh fileword template artikel. 

<<CONTOH>>

Author Guideline can be downloaded here.

Writing should be submitted according to the followingrestrictions: 

  1. Manuscript should be written in English and be submitted online via journal website. Online Submission will be charged at no Cost. Author must login in order to make submission.
  2. Manuscript should contain at least 2.000 words and should not exceed 10 pages including embedded figures and tables, without any appendix, and the file should be in Microsoft Office (.doc/.docx) or Open Office (.odt) format. It should be prepared  in A4 paper (21cm x 29.7cm) using 2.5 cm for inside margin and 2 cm for top, bottom, and outside margins.
  3. Title, Abstract, and Keywords should be written in English
    • Title should be less than 15 words, title case, small caps, centered, bold, font type Times New Roman (TNR), font size 16, and single spaced.
    • Abstract contains neither pictures nor tables, justified, in 11 TNR, single spaced, and should not exceed 250 words.
    • Keywords contain three to five words/phrases separated with coma and should be justified, 10 TNR and single spaced.
  4. Manuscript body.
    • The main text of the writing should be in two columns with 1 cm colom spacing, justified, 11 TNR, first line indent 5 mm, and single spaced.
    • Consists of: Introduction, Main Content (Method/Material/etc), Result and Discussion, and Conclusion; followed by Acknowledgment and References.
  5. Heading should be made in four levels. Level five cannot be accepted.
    • Heading 1: title case, small caps, left aligned, bold, 14 TNR, single spaced, Roman numbered followed by dot
    • Heading 2: title case, left aligned, bold, 11 TNR, single spaced, Capital numbered followed by dot
    • Heading 3: title case, left aligned, italic, 11 TNR, single spaced, numbered by number followed by closed bracket
    • Heading 4 is not recommended, however, it could still be accepted with the format of: sentence case, left indent 5 mm, hanging indent 5 mm, italic, 11 TNR, single spaced, numbered by small cap followed by closed bracket
    • Heading 5 cannot be accepted in the manuscript
  6. Figure and table should be in black and white, and if it is made in color, it should be readable when it is later printed in black and white. Figure and table should be clearly readable and in a proportional measure to the overall page. Caption should be numbered, in 9 TNR and single spaced. For layouting purpose, please provide the respective captioned figure/table in with extension .tif/.jpg/.jpeg within a particular folder apart from the manuscript.
  7. Mathematical equation should be clearly written, numbered orderly, and accompanied with any information needed.
  8. Header and footer including page number must not be used. All hypertext links and section bookmarks will be removed from papers. If you need to refer to an Internet email address or URL in your paper, you must type out the address or URL fully in Regular font.
  9. Citation and Reference are written according to IEEE style
    • Citations numbering should be numbered in [1], [2], [3], ... format, according to appearance order.
    • Wikipedia, personal blog, or non scientific website is not allowed to be taken into account.
    • Primary references should be at least 80% from at least ten references.
    • References shoul be taken from the late ten years.
    • Detail referencing manual can be seen in the Document Template

The Board is authorized to reject a manuscript based on peer reviewer advice and make a necessary changes or adjustment related with language properties without altering the substance. Substance editing would be consulted with the author first.

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. submission ini muncul di ketika penulis akan melakukan submit artikel.

    submission checlist ini harus di ceklist oleh penulis jika akan mengajukan artikel.

  2. The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.

  3. penulis harus download file agrreemen (CTA), lalu isi, tanda tangan, dan upload kembali.

  4. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
 

Copyright Notice

--> akan tampil di halaman AUTHOR/PENULIS ketika penulis submit artikel

 penulis sebelum submit artikel, harus mengirimkan Copyright Statement yang dapat di downlod disini.

<<CONTOH diambil dari jurnal MEV>>

Retained Rights/Terms and Conditions of Publication

 

1. As an author you (or your employer or institution) may do the following:

  • make copies (print or electronic) of the article for your own personal use, including for your own classroom teaching use;
  • make copies and distribute such copies (including through e-mail) of the article to research colleagues, for the personal use by such colleagues (but not commercially or systematically, e.g. via an e-mail list or list server);
  • present the article at a meeting or conference and to distribute copies of the article to the delegates attending such meeting;
  • for your employer, if the article is a ‘work for hire’, made within the scope of your employment, your employer may use all or part of the information in the article for other intra-company use (e.g. training);
  • retain patent and trademark rights and rights to any process, procedure, or article of manufacture described in the article;
  • include the article in full or in part in a thesis or dissertation (provided that this is not to be published commercially);
  • use the article or any part thereof in a printed compilation of your works, such as collected writings or lecture notes (subsequent to publication of the article in the journal); and prepare other derivative works, to extend the article into book-length form, or to otherwise re-use portions or excerpts in other works, with full acknowledgement of its original publication in the journal;
  • may reproduce or authorize others to reproduce the article, material extracted from the article, or derivative works for the author’s personal use or for company use, provided that the source and the copyright notice are indicated, the copies are not used in any way that implies RCEPM-LIPI endorsement of a product or service of any employer, and the copies themselves are not offered for sale.

All copies, print or electronic, or other use of the paper or article must include the appropriate bibliographic citation for the article’s publication in the journal.

 

2. Requests from third parties

Although authors are permitted to re-use all or portions of the article in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use. Requests for all uses not included above, including the authorization of third parties to reproduce or otherwise use all or part of the article (including figures and tables), should be referred to RCEPM-LIPI by going to our website athttp://telimek.lipi.go.id.

 

3. Author Online Use

  • Personal Servers. Authors and/or their employers shall have the right to post the accepted version of articles pre-print version of the article, or revised personal version of the final text of the article (to reflect changes made in the peer review and editing process) on their own personal servers or the servers of their institutions or employers without permission from RCEPM-LIPI, provided that the posted version includes a prominently displayed RCEPM-LIPI copyright notice and, when published, a full citation to the original publication, including a link to the article abstract in the journal homepage. Authors shall not post the final, published versions of their papers;
  • Classroom or Internal Training Use. An author is expressly permitted to post any portion of the accepted version of his/her own articles on the author’s personal web site or the servers of the author’s institution or company in connection with the author’s teaching, training, or work responsibilities, provided that the appropriate copyright, credit, and reuse notices appear prominently with the posted material. Examples of permitted uses are lecture materials, course packs, e-reserves, conference presentations, or in-house training courses;
  • Electronic Preprints. Before submitting an article to an MEV Journal, authors frequently post their manuscripts to their own web site, their employer’s site, or to another server that invites constructive comment from colleagues. Upon submission of an article to MEV Journal, an author is required to transfer copyright in the article to RCEPM-LIPI, and the author must update any previously posted version of the article with a prominently displayed RCEPM-LIPI copyright notice. Upon publication of an article by the RCEPM-LIPI, the author must replace any previously posted electronic versions of the article with either (1) the full citation to the work with a Digital Object Identifier (DOI) or link to the article abstract in MEV journal homepage, or (2) the accepted version only (not the final, published version), including the RCEPM-LIPI copyright notice and full citation, with a link to the final, published article in journal homepage.

 

4. Articles in Press (AiP) service

RCEPM-LIPI may choose to publish an abstract or portions of the paper before we publish it in the journal. Please contact our Production department immediately if you do not want us to make any such prior publication for any reason, including disclosure of a patentable invention.


5. Author/Employer Rights

If you are employed and prepared the article on a subject within the scope of your employment, the copyright in the article belongs to your employer as a work-for-hire. In that case, RCEPM-LIPI assumes that when you sign this Form, you are authorized to do so by your employer and that your employer has consented to the transfer of copyright, to the representation and warranty of publication rights, and to all other terms and conditions of this Form. If such authorization and consent has not been given to you, an authorized representative of your employer should sign this Form as the Author.

 

6. RCEPM-LIPI Copyright Ownership

It is the formal policy of RCEPM-LIPI to own the copyrights to all copyrightable material in its technical publications and to the individual contributions contained therein, in order to protect the interests of the RCEPM-LIPI, its authors and their employers, and, at the same time, to facilitate the appropriate re-use of this material by others. RCEPM-LIPI distributes its technical publications throughout the world and does so by various means such as hard copy, microfiche, microfilm, and electronic media. It also abstracts and may translate its publications, and articles contained therein, for inclusion in various compendiums, collective works, databases and similar publications

 

If you are a nonprofit or charitable organization, your use of an NC-licensed work could still run afoul of the NC restriction, and if you are a for-profit entity, your use of an NC-licensed work does not necessarily mean you have violated the term.

 

Privacy Statement

--> muncul di halaman ABOUT : Submissions : Privacy Statement

 

<<CONTOH>>

the names and email address entered in this journal site will be used exclusively for the stated purpose of this journal and will not be made available for any other purpose or to any other party.